Heavy Equipment Forums Heavy Equipment Community

JCB 3CX REAR BRAKE LIGHT NOR WORKING

WASEEM750 ยท 2017-12-22 05:54

JCB 3CX REAR BRAKE LIGHT NOR WORKING FUSE AND LAMPS WORKING FINE ANY CAN HELP ME THANKS IN ADVANCE

Replies17
  1. #1berky2017-12-23 05:25

    did you check the master cylinder pressure switch

  2. #2WASEEM7502017-12-23 23:11

    ACTUALLY I DON,T HAVE WIRING DIAGRAM. CAN YOU HELP ME WHICH RELAY FOR REAR BRAKE LIGHT

  3. #3jcb jeff2017-12-27 13:43

    These normally have a electrical button switch (micro switch) on the brake pedal under the dash on pedal arm

  4. #4WASEEM7502018-01-02 07:50

    i checked there is one switch micro vane switch .don,t know ho to test

  5. #5jcb jeff2018-01-03 04:13

    Whats the serial number?

  6. #6berky2018-01-03 05:39

    Own a backhoe and don't know how to test a switch!!!!! LOL

  7. #7WASEEM7502018-01-04 04:12

    SERIAL NO. JCB3CX4TL91348077 ACTUALLY THERE IS Sensor vane ON PEDAL

  8. #8WASEEM7502018-01-04 04:13
  9. #9WASEEM7502018-01-04 04:15

    CIRCUIT DIAGRAM DON,T HAVE

  10. #10jcb jeff2018-01-05 02:57

    It works by passing a piece of steel between the the 2 magnets

  11. #11jcb jeff2018-01-05 02:59

    Two options depending if you have a digital dash . If your machine has 4x4x4 it will be different again i have done the standard one.

  12. #12WASEEM7502018-01-06 03:27

    i HAVE machine 4x4x4 and 2WD can you upload for both pictures not clear may be screen shot THANKS FOR FOR YOUR HELP

  13. #13WASEEM7502018-01-12 20:07

    hello, Mr jeff could you please help in this issue

  14. #14WASEEM7502018-01-12 20:08

    Mr jeff could you please help in this issue

  15. #15jcb jeff2018-01-14 13:17

    See If this is any good. Jeff

  16. #16WASEEM7502018-01-15 12:11

    Hello, Today ,I am checking lamps. Rear brake wires found damaged corroded. repaired it .now its working fine. Replaced fuel lift pump also which leaking diesel. Thanks for all

  17. #17WASEEM7502018-01-22 01:11

    thanks