Heavy Equipment Forums Heavy Equipment Community

JD 750B Creeping in neutral

jdgse ยท 2020-05-29 13:28

Needing some help with this issue,machine moves when in neutral but can get to stop if you pull lever just a little in reverse buy if you throttle up will start to creep again. any help would be appreciated.

Replies5
  1. #1mg23612020-05-30 06:08

    If you are mechanically handy then you will need the tech manual TM1332 Operation and Test manual. That will be a must. That machine has a highly complicated control system for the hydrostats. Too complicated to explain adjustments over the forum. If you have the manual or acquire the manual I can direct you to where you need to go in the manual to accomplish what you need to do.

  2. #2jdgse2020-05-30 06:49

    Thanks for reply,yes we do most of are repair work,and i have a down loaded copy of that TM1332 manual.

  3. #3mg23612020-05-30 06:52

    Then start at the hydrostatic system section, diagnostic information, diagnostic flow chart, neutral problems. That is where you will need to start. Follow the flow chart.

  4. #4jdgse2020-05-30 06:59

    Thanks will read up on that section.

  5. #5jdgse2020-05-30 07:04

    I see your in Pennsylvania,this dozer came out of Emlenton,PA.