Heavy Equipment Forums Heavy Equipment Community

JD 850J Blade Float

Gus Mueller ยท 2026-04-01 01:02

My 2006 850J Blade Float will not stay engaged, has anybody came across this issue before. Thank you...Gus

Replies5
  1. #1mg23612026-04-01 04:48

    Serial number? Codes?

  2. #2Mcrafty12026-04-02 05:48

    Is it mechanical linkage? if so it may new to be tweeked it wears over time and may not be pushing the valve to detent.

  3. #3Gus Mueller2026-04-04 09:38

    It is all Hydraulic with one wired pigtail, thank you for your response

  4. #4Gus Mueller2026-04-04 09:40

    Thank you for your response mg2361 Serial #TO850JX132443 No Codes

  5. #5mg23612026-04-05 06:23

    Check your F9 5A fuse. If that is good, there is a switch on the bottom of the lift spool cap. Does it change state when you try to engage float? Your control lever does go into float detention, correct? Check your messages.