Hello All !st time poster. Hats off to all the knowledge base on this forum!! I have a question about a 40f that I acquired.( I have a bertea proportional valve bank. ) I have no pressure to the bertea valve bank. (swing lift drive). I also can not find a dump valve in the circuit? I know the pump is working. Is the dump valve in the bertea valve bank? If so where are the wires going to it. I have three sol. and three sets of wires. Im perplexed. Any help would be appretieated Thx Ed
Threads in multiple locations, which ask identical questions, can cause confusion. I'll close this one. Replies can be made, here: HeavyEquipmentForums