Does any one know were in the cab the buzzer is for the fuel/water sender.We have had the dealer out for this machine and can not find the problem .Would like to disconnect the alarm so operator can operate the machine.any help would would great.
just a shot in the dark here , is there a sending unit on the filter/separator. if so unplugging the wire may stop the warning ..
The water separator is in the pump compartment. There will be a 2 wire connector and a drain spigot on the bottom of a black plastic filter housing. Drain,remove and clean out this housing and reinstall. If there is an electric low pressure pump on top of this filter,turn the key to ON for one minute to bleed the system and then restart the engine.Otherwise,do it the old fashioned way. If the code is still there,check for continuity across the sensor...Ive seen a few fail.