Hey guys one of the operators got a machine stuck to the point then batterys were 12" blow water cat get power to cab unless back feeding power. Need a fuse diagram and curious if any one else has had a no power to cab issue already bypassed the disconnect
What is your email address ?I can email you the manual with the diagrams for the fuses.
[email protected]
Hi Tool_King, I'm having similar issues but with a valve fuse blowing. Can i ask you to send me a copy of the fuse diagrams also? Thank you.. [email protected]
catalyst.. if yours is just blowing the fuse to the start solenoid on the inj. pump.. its normally the cold start sensor in the cooling system.. IF you have a Stanadyne inj. pump, If you have 2 wires coming from under the inj. pump, follow them up to the connector & unplug it.. THEN replace the fuse.. It wont effect the running condition of your engine. its there to aid in COLD starting situations.. BUT if you want to replace the sensor.. just do a search.. the problem is common & the P# is readily found.
Catalyst I emailed you a link for the proper manuals John Deere 350DLC operation,parts,service and support manuals .