Hello, having an issue with a mini ex we recently got JD35G,SN 1ff035gxcjk281778. Machine worked fine and I left it sitting at a job for ab a week. Came back and it would start but the hydraulics would not unlock. Figured it was the switch under the arm lever. Replaced it with a new one. I can hear a relay click when the switch is pressed. Cracked a line at the hydraulic pump and it had pressure on it. Is there a solenoid somewhere that needs to open for the joysticks to unlock? Thanks
Serial number does not show up in the system. You sure it is correct? When standing in front looking at your machine with the sheet metal removed below the cab, there is a solenoid block to the left of the horn with 2 solenoids facing you. The solenoid to the right is the pilot shutoff solenoid. Might require cab tilting to access it.