Hello i am in need of some help, we have a pc150lc-6k with a 4cyl cummins We did not use it for afew weeks and now will not start now. It will fire of starter fluid so we changed all filter still the same. Now we have changed out the fuel shutdown solenoid. its sounds like like it wants to fire but just wont. I do not know were togo from here and any help would be great ser# k30786 thank you
Did you check the air filter? When you turn the key on does the monitor panel show an alternator light flashing?
yes i did check the air filter seemed fine, but i also did try it with the filter off. I didnt notices a alternator light on but i can check that in the am thank you
Hi sdd1369 may be the problem is compression when you have a used engine that no works for a few weeks in humid place. the pistons rings goes to glued by the humidity of the air caught in the cylinders. try to start the engine whit a spray lubricant put in the admision and start the engine at idle velocity