I have a pc30 Mini ex. It was operating normally when I shut it off. Upon restart the only sign of hydraulics is the swing or rotation and the blade up and down. All other functions are out. It beeps when you initiate forward or reverse, but no movement. I have been told it is most likely a solenoid not being energized . Has anyone had this problem and if so, any advice would be appreciated . Thanks for your time.
I appreciate that suggestion, but I was hoping that I could get the advice from a "qualified mechanic", or someone "familiar" with a pc30 on this forum. Or from a "shade tree" mechanic. I just need any insight before I go into this headfirst. Perhaps someone has had this same problem and see this post...
Good day Attached may help. Kind regards Uffex