I have a 2019 Kubota svl95 and I can't get it into float mode, I have tried every combination of fwd pressure on the right control and hitting the switch, watch many vedios and read the manual with no luck. I'm new to Kubota, I'm fairly familiar with the mx on the bobcats I have owned in the past, but this is a while different animal. I have no error codes, I didn't see anything in the fuse panel related to it, I was going to pull the handle apart and check the switch, o assume there is a solenoid somewhere for the bypass, notcsure of the location. Any direction is greatly appreciated
If it's working right you should be able to push the joystick forward & pull the trigger.