Heavy Equipment Forums Heavy Equipment Community

Kx41-3 Starting Issue

Kris ยท 2011-07-04 12:22

All fluids are good,,machine was working fine,,, shut machine off , got off machine to due some stuff, got back on and went to start and would not start it does turn over and see fuel in filter just not firing up.:usa

Replies9
  1. #1tool_king2011-07-04 16:20

    check battery ,starter and ground connections .check fuses for key switch.

  2. #2Kris2011-07-05 12:13

    lookin for input on what might be wrong that it turns over but not startin up...

  3. #3Anto Modded2011-07-05 14:10

    Does it sound like it wants to start ? could it be air or the fuel pump or fuel filter maybe

  4. #4Kris2011-07-05 14:23

    air filter is clean, Fuel filter is clean,,fuel pump is working,,,

  5. #5Haddy2011-07-05 14:45

    Try checking electric shut off value on fuel pump

  6. #6hitachi daft2011-07-05 16:46

    does it have a coded key

  7. #7tootalltimmy2011-07-05 18:21

    Emergency stop switch?

  8. #8tool_king2011-07-05 19:02

    Sorry Kris I thought you said it would not turn over my mistake.

  9. #9Kris2011-07-06 18:41

    Thanks Everyone,,, It was the Injector solinoid shutoff,,,stuck in the shut off position,,,had to dismantle radiator side of machine for access. Thanks Again