If any one has got a machine they would like to warn others buyers about , you might like to add the machine to this tread Mustang 2109 We own a Mustang 960 and have had a excellent run out of it , 8500 hours and still going strong , so we got a brand new Mustang 2109 ( very proud on the day :usa ) and has been nothing but trouble . At under 2000 hours and hardly a week goes by without something going wrong and not just little things :Banghead
case 40xt has drive motor issues, plan on replacing them at 2000hrs or less
Good post, hopefully others will chime in. Most all my machines I have had have been trouble free but I got a Terex excavator (HR20)) a few years back with low hours (20 to be excact). At under 200 the muffler burned out and the fuel tank had developed a pin hole leak. The cab door became stuck and you had to pull really hard sometimes to open it,other times it would open normaly so it was kinda funny when you pulled hard and it would open easy, you would fly off the tracks
Thankyou for replying . Just to add , this doesn't have to be about skid steers , it can be any machine that you have had a really bad run with . To be fair to the manufactures I would prefer that machines listed , have given trouble from brand new or ones with very few hours on them . Thankyou , Haddy
all new holland lx 885's i ever owned in my younger days. also a bobcat 442
Our (2) new Case SR175's, the fans keep exploding and sending pieces of fan thru the radiator and hydraulic cooler! Case dealer is scratching their head!