Heavy Equipment Forums Heavy Equipment Community

MITSUBISHI MX45 Code 51

zykul02 · 2016-08-10 19:47

Hello, I would like to ask if anyone know what is the meaning code 51 in MX45 , i dont know much with heavy equipment , can anyone could help me and/or can i get a manual of mitsubishi mx45 , thank you in advance

Replies6
  1. #1zykul022016-08-10 20:29

    By The Way My Email is [email protected] I am willing to pay if anyone can help me with this

  2. #2vltehnik2022-09-14 04:01

    Hi all. Faced with such a problem, the Mitsubishi MX45 excavator gives error code 51. Does anyone have a manual? Has anyone encountered such a problem?

  3. #3Graham Hamilton2022-09-15 08:49

    I don't have a manual for a MX45 but error code 51 on MM50 is a RH joystick error code ....voltage below 2.3V. Are your joysticks working correctly?

  4. #4vltehnik2022-09-18 22:05

    Hi everybody. we found a problem with error code 51. a break in the first solenoid and annular cracks on the board.

  5. #5Graham Hamilton2022-09-19 05:39

    Hi vltehnik, pleased you found what the problem was. Could you give us bit more detail re "first Solenoid" and do you have any pictures of the broken wire and cracks in board thanks

  6. #6vltehnik2022-09-19 23:18

    ошибка появлялась не стабильно, посмотрели провода и разъемы, оказалось что трескается кольцо на транзисторах и на разъеме контроллера. Первый соленоид представляет собой группу из двух соленоидов. Нет фотографии.