I have a 939C 6DS 00509 and cant seem to find the proper seal kit for the MP bucket hydraulic arm. I replaced the other side and cant find where I got the part. The ones I find listed are 1 1/2 in rod and 3 1/2 in cylinder. It is actually 2 in rod and 4 in cylinder any help would be appreciated MK
Not sure if this is what you need but take a look at the attached file if it come through.
In Case you don't have a .pdf reader.
Aftermarket like Hercules should have a listing for the seals too.
Thread moved from TLB to Track Loaders.
Thank you