Heavy Equipment Forums Heavy Equipment Community

NH aux hydraulic rocker switch

CMC76 ยท 2020-01-19 14:53

Anyone had to replace the rocker switch before. Went to plow yesterday. Was getting nothing from the aux function. Checked fuses. Nothing blown. Switch is available, about $250. Seems like a simple enough repair

Replies2
  1. #1KSSS2020-01-19 23:35

    Before you buy a new rocker switch, you may want to check the wiring from the switch in the handle. If your machine is an early 2011-2012 version there was some wiring routing issues in the handle. I had an issue with the aux. hyd switch on an early 2012 TR320, it was covered under warranty, but it was due to the routing, the wire had worn through. May end up needing the switch anyway, but perhaps it can be repaired without replacing the entire switch.

  2. #2CMC762020-01-20 00:02

    Thanks for the tip. When the cold breaks ill look into it.