Heavy Equipment Forums Heavy Equipment Community

Oil cooled Duetz/Gehl 4835

doityourselfer ยท 2010-09-24 22:09

Can anyone tell me where is the best place to connect cab heater lines on a Gehl 4835 SXT Duetz (BF3M1011F)?:beatsme:usa

Replies3
  1. #1landtekk2010-09-25 00:08

    There are two ports in the block that you install the lines into. They are near the flywheel on the left hand side behind the cooling lines. there is a ball valve installed on one line to shut off flow if needed.

  2. #2Part sman2010-09-25 11:53

    Should be stamped "IN" and "OUT" on block. OUT should be plumbed to the heater control valve, then to heater core and then back to IN port

  3. #3doityourselfer2010-09-26 00:56

    Thanks guys. I'm back on track and should beat the cold weather.