1. First, the excavator must be stopped on a clean and flat road surface for disassembly to prevent sand and dust from entering the motor. Firstly, the balance valve and check valve are dismantled. ▼2. Next we will remove all the accessories on the final drive motor cover, and walk the relief valve, buffer valve, shift valve core and so on. ▼3. The next step is to clean the travel motor cover and then separate the travel motor cover from the motor housing. ▼4. After removing the travel motor cover, remove the distribution plate, brake spring, and bearing one by one, and record the sequence. ▼5. Then remove the brake piston and brake pads. ▼6. Finally, we take out the pump plunger and the swashplate and drive shaft. The above is the step of disassembling the motor. The internal components of the traveling motor are many and all belong to the precision hydraulic components. Therefore, everyone must pay special attention to whether the disassembly environment is clean during the disassembly process checking our blog: www.spfinaldrives.com/blog
guess what？、、、 it is not spam
I always break the chain and remove the entire motor gearbox assembly.
Who's final drive? What model and manufacture? What type of machine? Why would you take something like this apart in the field? Why are you posting this? Are you trying to answer a question no one asked?