i`m thinkin seriously about building the opposite of a bolt on tooth bar for a loader bucket . I need a smooth cutting edge for 1 3/4 yard toothed bucket to keep gravel dirt free & i don`t want to change buckets . this thing has to slip over the teeth and be held in place by some method and that can be easily dropped of when not handling gravel. open to any and all ideas
A sparky had this on their Kubota mini-ex on a Quick Trip travel plaza we are working on. Pretty slick and something you might be able to fab up for your loader. Bolts into the side cutter bolt holes.
The side mount works, especially if it's something you'll use semi regularly, if it's a one time thing just take some junk teeth and weld some plate on.
thats real close to what i had in mind
Saw one but don’t remember where it slipped over the teeth then had a short chain with a ratcheting binder to a hook on the bucket to hold it on