Heavy Equipment Forums Heavy Equipment Community

Samsung se210 track issues

Bullseye Beaver F. ยท 2019-08-22 11:11

Any advice before I tackle the job of taking out a track plate? Thank you in advance.

Replies6
  1. #1uffex2019-08-22 11:34

    Good day BB Please see attached, always take the next one to the master link Kind regards Uffex

  2. #2Bullseye Beaver F.2019-08-22 13:53

    Thank you!

  3. #3funwithfuel2019-08-22 15:30

    You get make sure that the front idler has not eaten through the axle Haven't you

  4. #4Bullseye Beaver F.2019-08-23 16:53

    Yes. Trying to find the master link right now. Thanks.

  5. #5uffex2019-08-24 02:42

    Good day The original track master link had a pin rather like a cotter pin retaining the master pin in place however if the machine has had its tracks replaced it most likely has a normal master pin these normally have a small dimple in the middle another sure sign is the 14 lb. hammer witness marks.

  6. #6Bullseye Beaver F.2019-08-24 06:49

    Thank you. That narrows it down.