I have a 2004 Chev single axle dump with a scissor lift. I think the hydraulic fluid is low, because the box will not quite go all the way up. Does anyone know how to top of the fluid. There seems to not have any reservoir. Thanks.
Most scissor lifts use the cylinder as the reservoir. Should have a plug on the end by the piston to add fluid. Raise it up as high as you can and block it so you can reply how you made out. Don't want to see you get smashed! It can happen so be careful.
Bill, you were right. I got it toped off and now it lifts all the way up. Thanks for the help:drinkup