Guys this must be a stupid question because I can't find where anyone else has asked for the proper amount of slack but I have no manual.
If it's the same as PC200: Inspection 1. Raise the chassis with the boom and arm. When doing this, operate the levers slowly. 2. Measure the clearance between the bottom of the track frame and the top of the track shoe at a position that is safe even if the chassis should come down. Standard clearance: "S" PC200, 200LC, 210LC, 220LC: 303 ± 20 mm PC250LC: 331 ± 20 mm
Track sag should be 12.5 to 13.8 inches or 320mm to 350mm