cruise control & engine brake problem` both quit after adjusting clutch, cat eng. all fuses & relays check good all switches check good. but circuit has lost power to the steering wheel` I cannot (has the smartwheel pushbutton control) seem to track down the source from the in dash fuse panel which feeds the wheel even though i have the schematic for this particular truck i`m batting zero. open to any ideas
Engine brake should have a switch on the clutch, where if clutch depressed, jakes turn off. Should also shut off cruise if you push in the clutch. Any chance the switch needs adjusted after adjusting clutch? I don't know if they are a manual lever clutch.
How much pedal freeplay?
clutch pedal switch is ok` in this case the horn cr. ct' marker blink glove box lite and one other gizmo is on the same circuit no power to any