Where do the red safty pieces go when you have the cab jacked up? I cant find anything in the book that shows pics of them in place. Thanks
They go at the front of the cab.
Ok i see where those two go but what about the long one that has threads in one end that uses the bolt that held the cab down. It had 2 3/8 bolts that secured it down on the flat place above the starter. My book shows a pic of it with the threaded end being held with 1 of the cab bolts thru the upper cab mount bracket , i just cant tell how it is attached at the bottom. Im pretty sure its a safty for when the cab is at 24 degree where the other 2 are when the cab is all the over.
The bottom bolts to one of the holes in the pillar and the top bolts to the bracket on the cab, as you say. It will fit in when the cab jack is extended almost as far as it can go. This is the best I can find. You can just make it out behind the jack.
Ive got to raise the cab so i can pull injectors so i want that safety bolted in there to make sure it cant fall
Ok thanks for the information , Ill jack the cab all the way up and see if i can get it in there.
Then you have my wholehearted respect my friend.