Hey everyone New here. Looking for help with splitting tork from trans. Have all the manuals. So I have propped up the loader. removed front bolts and hoses. Removed bolts from tork/trans. Have a jack under tork tube. All linkage. free covers off rear tork and trans. Blocked engine to front wheels so it doesn't tip. It will not move more then an inch apart. Have tried a come a long to the front. No go. Also tried 20 bottle jack from seat post to frame. No go. Just to be clear I didn't put massive pressure on the bottle jack but I did try it. So if anyone can point me in the right direction would be much appreciated. Thanks phil
No replies yet.