Heavy Equipment Forums Heavy Equipment Community

Using a clicker box

awrepair ยท 2024-01-16 17:01

Is it possible to perform a transmission calibration on a D6T caterpillar LAY serial number prefix using a clicker box?

Replies4
  1. #1Nige2024-01-16 18:21

    It is indeed possible. Have you ever done it before.?

  2. #2awrepair2024-01-17 10:04

    I've used a clicker box when they first came out but it's been a while. D6T serial is LAY00961.

  3. #3Nige2024-01-17 10:43

    There is a sticky thread on HEF regarding the Click Box. See HERE , it may refresh your memory a bit. IIRC there is a copy of th euser instructions for the CB uploaded in one of the posts. Regarding a transmission calibration you will need to be in Mode #7 (transmission calibration) then sub-mode 40 which is clutch fill calibration. See the attachment. Start on Page 3.

  4. #4awrepair2024-01-17 14:52

    Much thanks, that's just what I needed.