Volvo ec290 finale drive disassembly instructions

1. #1uffex2022-05-24 06:12

   Good day From an earlier model, however, it is a very small difference. Kind regards Uffex

2. #2Kgh652022-05-24 19:22

   Thanks it's a ec290blc .I forgot to add the letters to the end of the model does it make a difference

3. #3uffex2022-05-25 03:14

   Good day No sir that makes the information more relevant to your machine. kind regards Uffex

4. #4Kgh652022-05-25 20:04

   Having problems can't get the hub apart any further than this

5. #5funwithfuel2022-05-25 21:38

   Now you have to extract the planet axles, remove the planets. Then you have to manipulate the large spanner ring off the housing.

6. #6Kgh652022-05-26 08:49

   Thanks everything is just all rusted up due to a lack of oil

7. #7funwithfuel2022-05-26 09:06

   There should be roll pins or set screws to retain the planet shafts. Then simply using a threaded puller should extract the shafts. Use a short bolt to leverage against the spanner ring. Use lube and good luck.

8. #8uffex2022-05-26 09:54

   Good day I thought it looked a little thirsty, be good to establish how the oil got out. Kind regards Uffex