Anybody ever rebuild/seal a drive coupling in one of these. Looking for the procedure to take apart.
Yes, it is possible to rebuild or seal a drive coupling in many machines. Here is quick steps: Locate the Couple: Find where it is located between the motor and the driven part. Safety First: Turn off the machine and disconnect it from power. Access and Inspect: Remove covers to access the coupling. check for damage. Disassemble: Follow the manufacturer's instructions to take it apart. Replace seals and parts: If needed, replace seals or damaged components with recommended parts. Reassemble: Put everything back together carefully. Test and Check: Turn the machine on and ensure the coupling works without leaks or strange noises. Document: Keep track of what you've done for future reference.