I was mowing with my skid steer today. It ran great and everything went as planned. After I was done and it sat for a number of hours I needed to move the machine. It started just fine but when I turned on the light switch it died. Now when I turn the key I have no power to anything. The dash cluster doesn’t light up or anything. I hope it’s something simple but am not 100% sure where to start. Any ideas?
A good start would be a Serial Number. I imagine it will be either MBT or KWB-something. The S/N gets you an electrical schematic appropriate to the machine that will enable you to start tracing power/grounds. Have you checked the tightness of the battery cable connections.? Do you have a multimeter.? Have you looked at any of the fuses yet.?