Key switch was broken and rain gets in. Looking for a new switch but they’re on back order. Machine was running well the first couple days, then wouldn’t start. The display is very hard to read. Checked battery voltage, had 8V on a single battery 12V system. Replaced battery, started fine, worked a day. Also. Checked the key/ ignition switch with multi meter and was operable. Machine would not start. Found Fuse 1; ignition fuse blown. Found machine would continue to blow that fuse- 30 amp- when trying to start. Removed starter and took to automotive shop and failed test. Installed new starter; no start. Now I have no power at display. Removed original key switch and installed generic 12V ignition switch- no change. No power on display. 30 amp ignition fuse is good. New starter and battery, no start. Anyone had this issue before? Thank you
No replies yet.