Heavy Equipment Forums Heavy Equipment Community

1980 580c tdc

pineman ยท 2020-12-01 08:33

I need a tdc pin for my backhoe with a 207D, can anyone suggest a vendor? Thank you in advance for any responses.

Replies4
  1. #1nova4812020-12-01 08:42

    http://e-backhoeparts.com/

  2. #2Tinkerer2020-12-02 10:19

    I have never heard of a TDC pin for a 207. Flywheel or crankshaft dampener marks is how TDC is located.

  3. #3pineman2020-12-02 11:07

    I guess that is why I am not able to find one! I will try to locate them. I am going to remove the fuel pump and send it out for a rebuild. If a problem arises I hope I can consult you again. Thank you.

  4. #4Tinkerer2020-12-02 11:39

    Be sure to use a cold chisel to make a line up mark on the pump mounting flange and the gear case. You gotta have it for the correct timing. Go here and download the service manual so you can get the pump timing info before you remove it. https://www.minnpar.com/manuals5.as...LS&SSSFName=CASE 580CK MODEL C SERVICE MANUAL