When the machine is run about 30 to 45 mins and I steer left or right, something seems to be hanging up in the linkage. The lever has no pressure on it when I release it, then about 1 to 2 seconds later whatever is hanging up releases and makes the track jerk back into motion. Any ideas what this maybe? The dealer told me that the steering levers connect to a shaft under the seat and there is a bearing on that shaft which can corrode and cause this problem. Only the top part of shaft is visible as I understand it. Once the lever linkage is disconnected from shaft it will pull out with bearing. Is anyone familiar with this bearing? Sorry that I don't know all the technical terminology but any help would be appreciated. Thanks
No replies yet.