Recently my 310 SE won't rev beyond 1200-1300 RPM when started cold. I can run it using the backhoe for a half hour or more and still can't exceed 1200-1300 RPM's. If I run it for just a few minutes then shut down for 10 minutes or so it will run fine when restarted (no limit on RPM's). The linkage is fine to the fuel pump and moving the linkage at the pump doesn't help either. I was told there may be a potentiometer in the fuel pump control or a limit switch in the seat. Does anyone have any experience with this or a wiring diagram showing this area. Thanks Alan
No replies yet.