Hello, just got done rebuilding a bobcat 751, got motor up and running and everything worked before or says the previous owner, The wheels will move both directions but no bucket lift or tilt. the operation unlock button does not light up. the bics. system has power but the bottom two lights flash once each. the bottom light is the wheel lock and the other is the bucket light that flashes once each and come on toghether at the same time. anyone have any thoughts? thanks in advance. dave
first check ALL of your ground wires. the bics coil and traction lock grounds are tied together in the main harness not far from the traction lock connector, and run all the way back to the battery neg post.
Ok will due that. Someone told me if the park break dose not work that it could mess it up, And I know the wheels turn. But dealer told me because break prob not working also took lift coil off. Put 12volts to it and put a screw driver to it and it did not try to magnetized it at all. Thinking coil is bad? Going to get new brake in morning. Will post with update when I replace that. Thanks
is this machine equiped with a door
a '99 751 would not be equipped with a door sensor....
Yea it does not have a cab on it so no sensor. Bought new park brake coil and stem, did not get to put it in tonight, tomorrow will do that.