Looking at purchasing a 2004 jcb 212s with low hours machine is in good shape but I could see after running it that the front and rear tires where out of alignment after running it for a while. It appeared that the steer cycliders where not leaking. Wondering what else could cause this/ is it a expensive fix. Thanks
There should be a lever under the hood, close to the rad ( on mine there is) if there is, its to adjust the wheel alignments. With the machine running, you would turn your steering "hard" right, then stop the machine. Locate that lever and "open" it, then restart machine and continue to turn "hard" right...( this will or should fix this issue. You then stop the machine ( leaving the steering wheel at a hard right position) and "close the lever that you previously opened. Thats it.
I understand that part. And that jcb says up to every 8 hrs is normal. But what if it's doing it more often and while not under any Load. Could it be something more serious