Could someone help me find where the sensor is located. The monitor displays pump p2 sensor. Will this result in power loss? The machine runs fine briefly and then slows down, track speed and bucket pushing power is reduced. The machine whines a lot. Is it potentially a broken wire and if so where should I look. Thanks in advance.
It's only a guess, especially since there are several versions of this (need serial number) but I'm thinking it's one of the high pressure sensors on the main pumps? If it's whining you might want to check the suction strainer, I believe it's under the hyd tank cover with the breather on it.
I have a 06 and same alarm came up the connection on top of hydraulic pump take it off and clean connector got rid of alarm and agreed on pump wine starving for oil.