Machine overheating. Fan does not turn. Any common issues with these? I have not put eyes on it other than video.
Check the belt.
The fan is hydraulically driven. No belt. You should be able to look into the side vents where the air should be coming out to see if the shaft is spinning. If it is not, not sure what to tell you. I think my shaft always spins and there is some type of clutch for when the fan kicks on when it is feeling hot.
Fan is charge pressure. Pull the pressure sensor out put a gauge in and check or if you have a keyless you can see charge pressure on the monitor. You should see around 400psi