I have a 2018 case 580NEP with 740 hours. Starts, drives, front end loader operates normal, no error codes, but this morning when I was digging it felt like it was losing power when I was retracting the extendahoe and raising the boom. A few seconds later I had no power at all to pilot controls or to outriggers. Not sure what I should check? I did pull fuses and didn’t find any burnt, the light on the pilot enable switch does illuminate green when pressed. Tried changing pattern selector. Any help would be greatly appreciated.
I can feel a little bit of pressure move in the lines as I press on the pilot controls but not enough strength to lift boom up.