Recently changed fuel filter on bobcat and now I’m having a fuel problem. I installed the filter bleeded the air out from the top of filter and pumped the primer and it ran good for about 4 hours and then it completely shut off while I was using it. First i tried priming it and had no luck, primer wasn’t getting hard. Disconnected the fuel inline from the filter and tried pumping the primer but no fuel would come out, so I’m having a problem getting fuel to flow out of the tank into the fuel filter. I have installed a new primer ball but that didn’t solve my problem. What else should I try.
Posting in the correct section (CTL/MTL) to get better exposure to your problem.?
Just made a account sorry I’ll try to find right thread to post in