this machine has been a nightmare the last few weeks pumps have been checked, no problems says injection inc. had them up there two times now i cant get them to prime, ive replaced all the fuel lines (about 3 months before this happened) new fuel filter, mechanical fuel pump works, cannot get the pumps to prime whatsoever ive tried pressurizing the fuel tank, left the lines off and not a drop of fuel sprays out has anyone had luck with getting one of these hatz diesels to prime? its a 2l42s
Check your fuel shut off solonoid, ensure that your getting power to it, and that it is working properly. Assuming your lift pump works (im assuming you primed your filters with the lift pump) What machine is this on??? (brand, model, ect) (the model 252 suggests its a dynapac???)
thanks, i wish it were an electric shutoff selonoid, its a throttle lever that once you put all the way down starves and shuts the motor off seems as though a governor spring broke, it would not allow the control arm to open and allow fuel into the injection pumps im now in the nightmare process of attempting to get parts for it, case handed vibromax over to jcb, jcb is a bunch of idiots (my dealer anyhow..very uncooperative) and hatz says its an equipment mfgr part and cannot get it though them
it should be a hatz part, because its on the injection pump. Thats my guess anyways.