Heavy Equipment Forums Heavy Equipment Community

319d won’t disengage park brake cose 2228.09

perdigonharleyquinn1017@g ยท 2023-05-11 21:56

Any one knows

Replies8
  1. #1Diesel Dave2023-05-11 22:11

    Serial number ?

  2. #2perdigonharleyquinn1017@g2023-05-11 23:00

    T0319dj186040

  3. #3perdigonharleyquinn1017@g2023-05-11 23:02

    Now it say no hcu data on can bus abnormal data rate on can bus

  4. #4mg23612023-05-12 04:57

    Is it only the park brake and everything else (hydraulics) work? Is the code active or stored? Any other codes? Did you check all your fuses, particularly the HCU fuses?

  5. #5perdigonharleyquinn1017@g2023-05-12 22:27

    No it wont move with park break on some time says left jointstick nocenerter also a code it started with was 2228.09 data to can Eregular r

  6. #6mg23612023-05-13 06:53

    So, when you sit in the seat, put the seat bar down and release the park brake, the loader hydraulics are also not working? Do the lights indicated below go out (seat belt light will be delayed) when you perform the above? If not, which lights remain on or come back on? Did you check all your fuses? If there are other codes, even stored, post them.

  7. #7tlizard2025-10-02 14:06

    7 and 8 stay on. Codes are 2228.09 emu. Abnormal data

  8. #8mg23612025-10-03 04:41

    Welcome to HEF tlizard ! When posting, please provide a machine serial number. 2228.09 is No CAN data from the HCU (Hydraulic Control Unit). Check your F1 and F15 fuses.