Did any one have the installation procedure for those brakes, the most important part is the adjuster washers, we have to reset it towards the piston? I can i get it but still the doubt, number (5)
Take the number of washers and divide by the number of the locations where they should go. If you have 12 washers and 3 locations then it will be 4 per location. As for the washer placement. Stack them in a way resembling a flying saucer.
Thank you. Correct me if im wrong, those washers put the caliper on free position.. meaning they bring the caliper back after the brake is applied, if those whasers loose they shape can lead to drag brake?
Yes. To both questions.