Have a problem with my Dozer. It’s a 2005 John Deere 450J has around 4600hrs. The engine iS de rating. I’m getting two codes. 1569.31 and 1076.31. My dealer told me. One is the de rate. The other is fuel pressure solenoid on the injection pump. They told me it could be the solenoid, so changed it, but it didn’t help. The problem seems to get worse when the dozer warms up. My operator used it for 4hrs today before it started acting up again . It’s intermittent. It’s comes and goes. Which scares me to get Deere to come down with my luck when they show up it will be running fine. Any ideas? Things to look for?
The problem ended up being a bad connection where the wiring harness connects to the ecm. Bad connection on the pin wire that goes to the injection pump. Easy fix but frustrating to figure out.
I know its been several years since you encountered this problem but could you elaborate on which wire was the problem? Was it at the injector pump or at the ecu plug?
Welcome to HEF Michael ! See below.