how to get clearance between torque convertor tabs and shuttle pump
Do you know about the manuals in this link? https://www.minnpar.com/manuals3.asp?FName=BACKHOE%20MANUALS&SFName=CNH%20%28CASE%29%20Service%20Manuals
worried about t converter lining up with shuttle pump only line up is with torquplate and holes are good and bolts good not worn I have a new t converter there is mention of line up tool my case dealer says they never had one hoping some one doethis all the time Ihave t connv and belhousing in plan on ising bolts screwed in bellhousing with
Install drive plate on converter and leave bolts finger tight. Turn plate one way against bolts and then tighten bolts to torque while holding plate, I use 3/8 impact to tighten and then torque.