Front bucket stuck in the air will move up 1inch and down one inch rotate bucket only rolls 1/2 a roll what is wrong
Sounds like other parts of the hydraulic system are still working? Fluid level good? Check the filter? Get the bucket somewhere it can be supported. Unhook the hydraulic line that would lift the bucket higher. Run it and see if when you try to 'lift' does hydr. fluid come out ... a lot? Also, if one of the two cylinders has seized, the limited motion you are seeing might just be on one end/side. Good luck.
Some of those had a safety lockout valve I think, anything that might look like that on your machine? Lever or knob in the same area as the loader valve?
Found problem someone left rags in the system and they plug the lines never seen anything like that before
Wow , i really want to know the answer
Thanks for letting us know what you found
I heard of a new skid steer that someone left a rag in the hyd. system from the factory and it caused a drive motor to fail from lack of oil.