so i got the tools out put her up on blocks 6 tons jacks will do? one each side on 4x4 wood base outriggers still out too. pulled tire ok drained tranax yuk ok pulled diff lock box rh side ok yuk pulled brake cover ok pulled off in this order 1 brake disc /1 steel disc/1braked/1steel/1 brake/1 brake??? pulled off brake cyl on top thru floor .disconnect brake line ok pulled the acutator assy out found one broke spring of the three.. ball bearings fine ok pulled off brake d/steeld/steel disc???? all done wthell total 5 fibre disc 4 steel but the order is wrong is it not ? what the proper sequence in reassembly thank you permatex red will do masters rusted garbage ' brake cyl rust and they are circular gouges on the insde garbage 2 steel disc no wear at all ruse the rest will replace 1 fiber disc no wear replace others a
Steel plate to trans, disc, steel plate, disc, steel plate, disc, install the actuating disc with the adjustment rod, disc, steel plate, disc, and cover. Be sure to align the notch in the steel disc with the lower grove in the brake housing.
damn over $2000 in parts and still useing several old components