The 4 in 1 bucket on my Case 580 SK gradually decided to stop curling up today any suggestions on a starting point for trouble shooting, clam works fine, raises and lowers fine just the bucket curling up is the problem.
Does the handle resist you? If so it is prObably in the bucket level system.
Shot in the dark because I don't know this machine, but some valves will leak oil into the "cap" on the bottom and stop the spool from moving down, obviously this would be gradual. Not sure which way the curl valve functions on this machine, if curl up pulls the spool out of the valve body then it obviously isn't this problem.
jammed bearing on the rod for return to dig system under the cab, right side.