Good day I have a 753G Bobcat that until recently ran flawlessly. over the past 2 months the Broom attachment was randomly shutting off. the past week the seatbar sensor was opening and causing an abrupt stop to everything including traction lock. Almost went through the front window a few times. The seatbar light would come on, then randomly go off not allowing anything to happen with the machine. I sent away for a new seat-bar sensor and installed it. it flashes once when the seatbar comes down, then nothing. no light. I checked positive to ground on the seatbar wires and the voltage is 5 volts DC. This is very frustrating. anyone got advice on where to go next?
No replies yet.