Heavy Equipment Forums Heavy Equipment Community

850J Ripper Cylinder

Deimos ยท 2026-05-26 04:50

Hello everyone. Can anyone post detailed instructions on how to disassemble and assemble the ripper lift cylinder? Serial number: 1T0850JXCBC215485

Replies5
  1. #1mg23612026-05-26 11:59

    A picture of the rod guide would help. Check your messages.

  2. #2Deimos2026-05-27 00:06

    Thanks for the instructions. Are there any specifications for these hydraulic cylinders? For example, the ring bore dimensions, the cylinder bore diameter, etc.?

  3. #3mg23612026-05-27 04:54

    Not that I can find. So long as the barrel is not scored, or "ballooned" anywhere, then it should be fine.

  4. #4Welder Dave2026-05-27 12:52

    Doesn't the brochure list the bore and stroke?

  5. #5Deimos2026-06-01 23:22

    The problem was that the outer ring had popped out on its own. Apparently, the ring was deformed. We simply welded it back on, and it's holding up for now.