Location of the sensor for the torque converter thermostat? SN 86J266
Reckon its where the oil outlet valve is? On bottom side underneath?
Also, the oil pressure lime that runs to the gauge.... located on back of the block?
This is the best I can do. The Parts Manuals back on those days were none too clever.
Appreciate it nige. Was missing that line completely and had nothing to trace. Where'd you pull that up at? Looked everywhere In my service manual and couldn't find that. Love the 73 page thread of the 951c and have read thru most of it.
Parts Manual. With a machine that old you really should have one and not have to depend on dealer parts guys to be able to find Part Numbers for you. The Cat Publication reference for 86J machines up to 1660, which includes yours, is UE070124. Try searching for one in the usual internet marketplaces. If that fails these guys will have one - https://www.servicemanualpro.com/?page=Products&searchbox=86J00266
Ahhhh, whole database full. Perks of the job. I have one, must be missing that page. Didn't think a book would be $500 that's merely impressive.
Look in the Operator Station section, Panel Group - 6K-5189 Gauges & Dash.
Missing that whole section. Thank you nige.
When dealer labour is currently priced North of $150/hr inc travel time the service manuals are cheap IMHO.
Southeast?
If you can find a Cat dealer anywhere in the country that is charging less than $150/hr for a field service truck with all the bells & whistles & a service tech to drive it I would say you are doing extremely well. Other contributors may have differening vies.
You will not find a CAT service tech for less in SC might try a independent what part of SC are you in
Upstate. Don't need one was just more or less interested in how much going rate is.