recently purchased a alis chalmers 7 g loader, checking all mantainence items, the ujoints on the drive shaft are impossible to get a grease gun on fitting not enough space between ujoint holders for the grease gun end to fit nipple. has anyone got any recomendations, and no disasembly.
I used a standard Lincoln gun on mine when had one, tip is a taste smaller than the off name guns. If can see the zerks buy a Needle Tip from auto parts store and should be able to get at them, just rest the point at the check ball.
https://www.amazon.com/Lincoln-Lubrication-5806-Grease-Needle/dp/B001HWAYGK
Mine has a zerk inside a hood slips onto a standard gun Had it over thirty years
thanks guys for the useful info will see what i can find